How To Maintenance Car Radiators


Car engine temperature cooling system is basically supported by three of the following; coolant, lubricant, and air. These three components are interconnected with each other and are the most decisive elements for the efficiency of car performance. Well, here are some things you need to consider when going to car radiator maintenance:

Radiators

The radiator serves as a cooled liquid vessel and as the primary container. Therefore the condition of the radiator must be properly maintained and well maintained. Highly recommended to always maintain cleanliness of the radiator, both inside and outside.

On the outside of the radiator there is a thin grille that serves as the wind outlet. If the lattice is clogged with dirt, then we can be sure the volume of the flowing wind will be reduced or obstructed, so that the cooling process can not be optimal. To clean the parts, you can use a soft brush or by spraying low-pressure water, so as not to damage the thin grille.

On the inside of the radiator, generally will occur rust, especially on radiators that have been old or aged. The circulation of the cooling system can be hampered by the rust. Or in cases of severe rust, it could cripple the circulation of the cooling system. Therefore, it is advisable to drain the water regularly, at least once a year. This you can do on your own or be able to leave it to an expert, especially if a leak is found.

If the radiator on your car has not been drained or you just bought a used car without knowing about the car's radiation care history, it would be nice if you handed over the process to the experts. Because if the dirt that clogs inside the engine coolant circulation line is too much, then when you drain it in the wrong way, it can even clog some narrow channels contained in it that will cause failure in the cooling process.

Radiator Hose

This radiator hose acts as a liaison between the engine and the radiator as well as the channel where the coolant flows. High or increased water temperatures and pressures can make the radiator hose longer and more fluid and will also decrease. We recommend that you immediately do a replacement if it is time to be replaced.

Because if you are late replacing it, then the consequences can be very fatal, such as obstruction of the water circulation channel or in severe cases the hose could have been torn. As a result, the existing liquid will be drained instantly so that the engine temperature increased dramatically. If this happens, usually the car engine will die and there is an intriguing sound.

Close Radiator

Note also whether the spring and rubber seal can still work properly or not. Because if both are problematic, then it could lead to increased temperature of the car engine.

Clamp or Radiator Hose Tester

These clamps are usually made of iron or steel to ensure that between the hose and the radiator are properly connected. Because the role of radiator binder is very vital to keep from being released or leaking, make sure if the clamp is tied strong enough but not to bind it too strong because it can make a radiator hose damaged or torn.

Cooling Fan

In order for this one device to work normally, periodically check the condition of the silicone fluid and the fan strap. Make sure if both components are always maintained in good condition.

Oil Pump

What is also important to always be considered from the engine cooling system is the pump oil. In addition to pumping oil to the engine that requires, through this process also cooled the engine.

Well, that's the good, right, and safe steps you can take to take care of your car's radiator. With the maintenance of cooling system in your car engine, surely will add comfort and safe when you travel with family with your favorite car. May be useful.

Share this

Related Posts

Previous
Next Post »